Drill Bits
Most of us shudder at the thought of using a Nail Drill (or Electric File) when first suggested to us. Let's face it, we CAN do a lot of damage to the client if we dont know how to use a drill properly! It is all about education and 'having a go'. Once we start to feel confident we soon find that we tend to use the Drill more and more.
So we have our Drill, but are we using it to its full potential? To do so, we need to examine the different 'bits' that are available for use. The bits you choose are just as important as the drill you buy. The best drill in the world will give disappointing results if used with an inferior drill bit. Spending a little extra money to ensure you are purchasing a well-made and reputable drill bit will not only give you better results but will save you money in the long run.
At this stage we only sell Tungsten Carbide drill bits as these are an extremely hard metal and they work by 'cutting' away product rather than 'vibrating' or 'rubbing' away like Diamond bits and/or Stone bits.
Carbide bits result in less friction, (the major cause of heat build up) and they tend to last a very long time. They leave a smoother finish than Diamond drill bits.
Please remember that you MUST keep your drill bits clean. They do build up with acrylic/gel particles and must be cleaned to ensure top performance and cutting power. I simply soak mine in Acetone for a couple of minutes, dust out with a Manicure Scrubbing brush and place away ready for their next use.
A general guide for the use of each drill bit is below:
Cone: Around Cuticle area/Under nail
Undernail Cleaner: For cleaning and removing debris from under the nail.
Barrel: Removing Acrylic, Sides, Shortening
Backfill: Cutting the French Smile line.
Sanding Bands: are placed over the mandrel and are used for general buffing/finishing. They are disposable and tend to heat up quickly so it is recommended that you reduce the RPM on your drill when filing this way.
Back to Articles
